
A = Platform Width
B = Platform Depth
C = Hoistway Width
D = Hoistway Depth
E = Clear Door Opening
O = Overhead
P = Pit Depth

Download Available Information
Contact an Elevator Package Representative to place an order
507-245-4198
Application Summary
This design utilizes wire ropes in conjunction with two hydraulic jacks to lift the car at a 1:2 ratio. For every foot that the jacks rise, the car rises two feet. The use of two jacks, one on each side of the car, provides maximum structural stability.
Advantages
- No jack hole is required and with that there is no risk of oil contamination in the ground.
- Accommodates front and rear openings in any configuration.
- Available for both low and high capacity cars.
- No extensive pit or overhead is required.
- Large platform designs and high capacity projects can be accommodated.
ENGINEERED TO ORDER – Contact MEI For Sizes or Capacities Outside Listed Ranges
Specifications
A x B
C x D
P Pit Depth = 4′ -0″ • O Minimum Overhead = 12′ -5″, *Denotes Minimum Overhead = 12′ -5″ •
Cab Height = 8′ -0″
A x B
C x D
P Pit Depth = 4′ -0″ • O Minimum Overhead = 12′ -5″ • Cab Height = 8′ -0″
A x B
C x D
P Pit Depth = 4′ -0″ • O Minimum Overhead = 12′ -5″, * Denotes Minimum Overhead = 12′ -5″ • Cab Height = 8′ -0″
P Pit Depth = 4′ -0″ • O Minimum Overhead = 12′ -0″, *Denotes Minimum Overhead = 12′ -5″ •
Cab Height = 8′ -0″
P Pit Depth = 4′ -0″ • O Minimum Overhead = 12′ -0″ • Cab Height = 8′ -0″
P Pit Depth = 4′ -0″ • O Minimum Overhead = 12′ -0″, * Denotes Minimum Overhead = 12′ -5″ • Cab Height = 8′ -0″