A = Platform Width
B = Platform Depth
C = Hoistway Width
D = Hoistway Depth
E = Clear Door Width
F = Clear Door Height

O = Overhead
P = Pit Depth
R = Door Clearance
R = 5″ for Regular Type Doors
R = 7″ for Pass Type Doors
S = Platform to Wall

Download Available Information

Contact an Elevator Package Representative to place an order

Application Summary

This application is used when a side opening is required in addition to a front opening. The rails and brackets are located on one wall of the hoistway. Please note that the dimensions shown are only examples of applications possible. Please call MEl for job-specific dimensions.

Advantages

  • Accommodates front and side openings.
  • No extensive pit or overhead is required.
  • Available for both low and high capacity cars.

ENGINEERED TO ORDER – Contact MEI For Sizes or Capacities Outside Listed Ranges

Specifications

Freight Elevators – Standard Specifications
Capacity (lbs)
Platform
A x B
Hoistway With Power Regular Doors
C x D
Hoistway With Power Pass Doors
C x D
Pit Depth
P
Clear Inside With Single Section Gate
WxD
Clear Inside With Two Section Gate
WxD
Door Width & Height
E x F
Elevation & Plan View Drawings
4000 Lbs
9’-0” x 8’-8 1⁄2”
10’-5” x 10’-3 1⁄2”
10’-6 ¾” x 10’-5 1⁄4”
4′ -6″
8’-5 1⁄2” x 8’-2”
8’-3 1⁄2” x 8’-0”
7′ -0″ x 8′ -0″
DWG FilePDF File
6000 Lbs
10’-0” x 9’-8 1⁄2”
11’-5” x 11’-3 1⁄2”
11’-6 ¾” x 11’-5 1⁄4”
4′ -6″
9’-5 1⁄2” x 9’-2”
9’-3 1⁄2” x 9’-0”
8′ -0″ x 8′ -0″
DWG FilePDF File
8000 Lbs
11’-0” x 10’-8 1⁄2”
12’-5” x 12’-7 1⁄2”
12’-6 ¾” x 12’-9 1⁄4”
4′ -6″
10’-5 1⁄2” x 10’-2”
10’-3 1⁄2” x 10’-0”
9’-0” x 8’-0”
DWG FilePDF File
10000 Lbs
12’-0” x 11’-8 1⁄2”
13’-5” x 13’-7 1⁄2”
13’-6 ¾” x 13’-9 1⁄4”
4′ -6″
11’-5 1⁄2” x 11’-2”
11’-3 1⁄2” x 11’-0”
10′ -0″ x 8′ -0″
DWG FilePDF File

Notes:

  • Overhead dimensions are based on 6 foot high car gate.
  • Two section car gates are not recommended for high usage installations or wide openings.
  • For extra high door opening requirements, or special conditions, consult your representative.

Standard Cab Height H = 8′-0″
Minimum Overhead for Single Section Gates
O = 14′ -6″
Minimum Overhead for Two Section Gates
O = 12′ -4″
Platform to Wall
S = 14″